Dabcool W2 Electric Dab Rig
The Exseed Dabcool W2 Electric Dab Rig is a portable, user-friendly water pipe vaporizer electric dab rig designed for concentrates and dab usage. formulated for greasy oils like lard, butter, and other extracts. The Dabcool W2 Kit has a handle at the bottom that is more comfortable to hold and operate.
It is constructed of rubber and metal. It has a 1500mAh high-performance lithium-ion battery installed, which offers a strong heating function and an extended lifespan. The Dabcool W2 Kit has a button on the front for operation.
To switch on the electricity, press five times. The temperature is shown on an LED display right now. The Dabcool W2 Kit features four temperature settings (450°F, 500°F, 600°F, and 680°F) and an intelligent temperature management system with a quick heating time of 20 seconds. To heat the gadget, click the power button twice. To cycle between the four heating levels, push the button once.
Water cannot escape through the borosilicate glass body of the splash guard located at the top. A cap is included with the atomizer to facilitate dabbing. The atomizer’s heating and inhalation resistance are both improved by the design. Its four-gear design allows it to hold tobacco paste, e-liquid, and sliced tobacco. Reminder: Please keep the atomizer away from water as it will erode its inner wall.
Features:
- Surface Material: Metal
- Metal and Rubber Body
- Size:194*82*53mm
- Colors:Gunmetal,Blue,Red,White,Yellow,Rainbow
- Battery Capacity:1500mAh
- Intelligent Temperature Control System
- Temperature Controllable 4 Gear
- Output Temperature:450°F/500°F/600°F/680°F
- Press to adjust the temperature
- Supports cut tobacco,e-liquid,and tobacco paste
Includes:
1*Alcohol Pad
1*Micro-USB Super Charger
1*Dab Tool
1*Glass Attachment
1*Atomizer
1*Base
1*Silicone Container
1*Carb Cap
2*Extra Bowl
HOW TO USE
STEP 1: Fully charge device before first use. White lights pulse while charging, and turn off automatically when complete.(1 light: 0-25%; 2 lights: 25-50%; 3 lights: 50-75% ; 4 lights: 75-100%)
STEP 2: Fill glass with water just above the air-hole. Do not fill glass while attached to base.
X- Do not allow water in lower section!
STEP 3: Align inlet hole on the front of the glass with atomizer. Carefully place the glass into the base.
STEP 4: Hold the button for 3 seconds to turn on device (same way to turn off device). The white lights will flash once and the ambient lights will flash sequentially red>blue>green.
STEP 5: Single click to toggle through heat settings.
1 white light: 450℉ 2 white lights: 500℉
3 white lights: 550℉ 4 white lights: 600℉
Device will vibrate once while changing heat.
STEP 6: Use Loading Tool to place contents on the bottom surface of the bowl [not the side].
STEP 7: Place carb cap on top of atomizer.
STEP 8: Double-click to initiate heat-up [5 seconds avg. ], device will vibrate twice and ambient lights will be red. Single click the button to turn off the heat-up process at anytime.
STEP 9: Ambient lights will turn green when ready. ( green lights will be on for 20 seconds, then heat up process automatically stop and ambient lights turn blue)
STEP 10: Use a cotton swab to clean the chamber after each use.
Reviews
There are no reviews yet.