Find out more about the SMOK SCAR P5 80W Pod Mod Kit, which runs on a single 18650 battery and employs RPM coils to deliver taste from a proprietary pod. The SCAR-P5’s zinc alloy chassis houses a proprietary processor, and its bottom battery compartment may be opened to remove the device’s single high-amp 18650 battery. The SMOK SCAR-P5, which fills the magnetically held pod at the top, can produce power in the 5-80W range and is compatible with any coil from the well-known SMOK RPM Coil family.

SMOK SCAR-P5 80W Pod Mod Kit Features:

• IQ-80 Chipset
  
• Dimensions: 117.6mm by 35.8mm by 28mm
  
• Single High-Amp 18650 Battery (Not Included)
  
• Wattage Output Range: 5-80W
  
• Voltage Output Range: 0.5-4.0V
  
• Resistance Range: 0.15–2.5 ohms
  
• Firing Speed: 0.0015s
  
• Zinc-Alloy Chassis Construction
  
• Single Intuitive Firing Button
  
• 0.96″ TFT Color Screen
  
• Two Adjustment Buttons
  
• Bottom Hinged Battery Bay
  
• 5mL mL Pod Capacity
  
• Side Fill System – Silicone Stoppered
  
• SMOK RPM Coil Series
  
• 0.4ohm RPM Mesh Coil
  
• 0.16ohm RPM 2 Mesh Coil
  
• Press-Fit Coil Installation
  
• Dual Airflow System: MTL & DTL Vaping
  
• Magnetic Pod Connection
  
• Intelligent Atomizer Recognition
  
• Low-Voltage Protection
  
• Short-Circuit Protection
  
• Timeout Protection
  
• High-Temperature Protection
  
• MicroUSB Port
  Available in Black, Fluid Black Grey, Fluid Red, Fluid Red, Fluid Blue, Fluid Green, Red, Prism Rainbow, Fluid 7-Color
  

Includes:

• 1 SCAR-P5 Pod Mod
  
• 1 0.4ohm RPM Mesh Coil
  
• 1 0.16ohm RPM 2 Coil
  
• 1 SCAR P-5 RPM Pod
  
• 1 SCAR P-5 RPM 2 Pod
  
• 1 MicroUSB Cable
  
• 1 User Manual

Make sure to properly prime each coils and pods before use.

Please make sure you know fully how to use mods and batteries that are compatible with sub-ohm coils if the coil has a sub-ohm resistance. It is not advised to utilize a flat or short 510 connection on any hybrid or hybrid-style device. If there are any particular things or settings that you are unsure of or unfamiliar with, please do not utilize it. Always take the proper precautions and handling.

Rechargeable battery use is dangerous at all times and in all circumstances, it should be highlighted. The manufacture of packs or any other modification made to the batteries, chargers, devices, or other products we carry does not entail any liability on the part of ElementVape.com or any of its parent or subsidiary businesses.

If you use a Li-ion (lithium-ion), LiPo (lithium-ion polymer), or any other type of rechargeable battery or batteries and chargers incorrectly, you could hurt yourself or cause damage, which ElementVape.com and any of its parent and subsidiary companies are not responsible for. Please learn more about the batteries and chargers you use and how to take good care of them.

Working with Li-ion (lithium-ion), LiPo (lithium-ion polymer), and other rechargeable cells requires extra caution and attention since they are very sensitive to charging characteristics and can burn or explode if handled incorrectly. Please make sure you know how to use rechargeable batteries before using any of them. It is recommended to charge batteries on a clean, fireproof surface at all times. Batteries should never be left to charge alone. If you see any evident damage to the batteries, kindly do not use them. It is imperative to handle, store, and transport rechargeable cells in a regulated setting within a safe, non-conductive container.